Factory Reconditioned Ridgid ZRR4510 10-in Portable Table Saw with Stand
Learn more about freight deliveries.
You May Also Like These...
- 15 Amp Motor - heavy-duty power with soft start
- Single Height/Bevel Adjusting Handwheel - includes both quick and micro bevel adjustment with blade height lock
- Toolless Blade Guard - quick and easy installation or replacement with a single action lever
- Anti-Kickback Pawls - allow for effortless removal and installation independent of the blade guard
- "T" Slot Miter Gauge - provides additional capacity for cross-cutting
- Ind-I-Cut Alignment Disc - writable surface to accurately align cut line with blade
- MicroJust Fence - for best-in-class accuracy
- Retract-A-Rip System - extendable rail and table system that maintains rip dimension accuracy to the blade up to 25-in rip capacity
- Soft Start - provides smooth starting, prolongs motor life, and reduces breaker tripping
- Oversized On/Off Switch Assembly - for easy actuation
- Large Bevel Scale - for increased accuracy
- 2-1/2-in Dust Port - provides connection to standard shop vacuum or dust collection system to help keep work area clean
- On-Board Storage - holds rip fence, miter gauge, blade guard assembly, anti-kickback pawls, push stick, extra blades, blade wrenches, and power cord within easy reach for transportation
- Accessory Storage - for tape measure, pencil, or other marking tools
- This item may ship in the original manufacturer's packaging.
- 10-in Portable Table Saw with Stand - ZRR4510
- Carbide Tipped Blade
- Anti-Kickback Pawls
- Blade Guard Assembly
- Rip Fence
- Miter Gauge
- Push Stick
- Blade Wrenches
- Operator's Manual
| Amperage: | 15 |
| Motor Type: | Single Phase |
| Blade Diameter: | 10-in |
| Arbor Size: | 5/8-in |
| RPM: | 4,400 |
| Table Type: | Aluminum |
| Tilt: | Left |
| Extension Type: | Sliding |
| Voltage: | 120V |
| Weight: | 94 lbs. |
| Dust Collection Minimum CFM: | 350 |
| Dust Port: | 2-1/2-in |
| Miter Gauge Type: | Standard |
| Max. Depth of Cut at 90 Degrees: | 3-1/2-in |
| Max. Depth of Cut at 45 Degrees: | 2-1/4-in |
| Max. Rip Right of Blade: | 25-in |
| Max. Rip Left of Blade: | 12-in |
Warranty Information
Reconditioned Ridgid Power Tool Limited 1-Year Warranty
One World Technologies, Inc warrants its power tools with the following conditions:
What This Warranty Covers
This warranty covers all defects in workmanship or materials in your Factory Reconditioned Ridgid power tool for a period of one year from the date of purchase.
How To Get Service
Just return the power tool, properly packaged and postage prepaid to a Ridgid Authorized Service Center. You can obtain the location of the Service Center nearest to you by contacting a customer service representative at 800-860-4050 or on-line through our Service Center locater at www.ridgid.com. When you request warranty service, you must also present proof of purchase documentation (sales receipt/bill of sale). We will repair any faulty workmanship, and either repair or replace any defective part at our option. Work will be performed without charge to your. We will complete the work in a reasonable time, but in any case, within ninety days.
What Is Not Covered
This warranty applies only to the original purchaser at retail and may not be transferred. This warranty only covers defects arising under normal usage and does not cover any malfunctions, failure, or defects resulting from misuse, abuse, neglect, alteration, modification or repairs by other than Ridgid Authorized Service Centers. Ridgid makes not warranties, representations or promises as to the quality or performance of its power tools other than those specifically stated in this warranty.
Additional Limitations
Any implied warranty granted under state law, including warranties of merchantability or fitness for a particular purpose are limited to one year from the date of purchase. Ridgid is not responsible for direct, indirect, incidental or consequential damages. Some states do not allow limitations on how long an implied warranty lasts and/or do not allow the exclusion of limitation of incidental damages, so the above limitations are exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
Product Reviews
REVIEW SNAPSHOT®
by PowerReviewsPros
- Easy to use (17)
- Good power output (17)
- Good design (16)
- Safe (15)
- Great blade (9)
Cons
Best Uses
- In the workshop (17)
- Home improvement (13)
- In the field (10)
- Reviewer Profile:
- Avid do-it-yourselfer (7), Professional (7), Casual do-it-yourselfer (5)
REVIEWS
Reviewed by 20 customers
Sort by
Displaying reviews 1-10
Previous | Next »
Pros
- Easy To Use
- Good Design
- Great Blade
- Powerful
- Safe
Cons
- None
Best Uses
- Home Improvement
- In The Field
- In The Workshop
Comments about Ridgid 10-in Portable Table Saw with Stand:
Don't waste your money saw that cost more money . This saw is fantastic and is always right on the mark. Easy to move and set up. Great Buy!
Pros
- Easy To Use
- Good Design
- Powerful
- Safe
Cons
Best Uses
- Home Improvement
- In The Workshop
Comments about Ridgid 10-in Portable Table Saw with Stand:
If your planning to do any dato cuts, do not purchase a 8" stack dato set as this unit will only handle a 6" stack dato package. It works fine and does a great job but I bought the 8" and then found out the manufacturer recommends a 6". I didn't know that until I got my saw and read the manual.
Pros
- Easy To Use
- Good Design
- Heavy
- Powerful
- Safe
Cons
- Heavy
Best Uses
- Home Improvement
- In The Field
- In The Workshop
Comments about Ridgid 10-in Portable Table Saw with Stand:
The saw came in great shape, the only problems were a few scratches in the top, a melted RECONDITIONED in the plastic body.
The saw is heavy, but the gravity stand makes it easy to move around. It should be noted that this saw is wider than a 30" door so it is slightly difficult to move it around inside a house. Personally I don't like using a table saw inside someone's house anyway as the mess it creates.
The blade is okay for ripping rough lumber, but there is a lot of tear out so I would buy a better blade if you are doing finish work.
Pros
- Easy To Use
- Good Design
- Great Blade
- Powerful
- Safe
Cons
Best Uses
- Home Improvement
- In The Workshop
Comments about Ridgid 10-in Portable Table Saw with Stand:
Used for home projects and toys for Great Grand Son
Pros
- Easy To Use
- Good Design
- Great Blade
- Powerful
- Safe
Cons
- Could not fine any
Best Uses
- Home Improvement
- Job site
Comments about Ridgid 10-in Portable Table Saw with Stand:
This saw was good right uto of the box. I have had this saw for about 2 years and still runs as good as new. Saw used about every job I do. Ridgid out did themself on this saw.
Pros
- Easy Set-up
- Easy To Use
- Powerful
- Solid construction
Cons
- Poor initial blade
Best Uses
- Home Improvement
- In The Field
- In The Workshop
Comments about Ridgid 10-in Portable Table Saw with Stand:
I bought this saw after using one on a job site. I have used the Blue Table saws as well and this saw holds it's own with it. When I was looking for a new table saw, I looked at both the Blue and the Ridgid. At over $100 less expensive for a new, when I saw the CPO price of almost $100 less than that the deal was sealed. The 4510 is slightly heavier than the Blue and this matters when you are pushing plywood or ripping long sticks of lumber. The stand was excellent, easy to operate and smooth.
My only complaint is that the table isn't smooth. Wood slides on it, but it gets dirty quickly and requires a bit more cleaning than other table saws.
Pros
- Easy To Use
- Good Design
- Great stand
- No tweaking needed
- Powerful
- Safe
Cons
Best Uses
- Home Improvement
- Home shop and job
- In The Field
- In The Workshop
Comments about Ridgid 10-in Portable Table Saw with Stand:
After buying this , my cheap-o table saw and my big stationary saws will be sold . This takes the place of both of them . Easy enough to wheel it wherever I need and as accurate as most big bulky stationary saws . Surprisingly powerful . As soon as the factory blade dulls , there`ll be a good Freud blade going on . That should make it even faster and cleaner cuts . All in all , a 10 outta` 10 !
Pros
- Big adjustable table
- Good square cuts
Cons
- Blade guard poorly design
Best Uses
- In The Field
- In The Workshop
Comments about Ridgid 10-in Portable Table Saw with Stand:
I bought this saw recon about 2 years ago. I use it just about everyday. It is extremely durable and has survived well riding in the back on my truck. I was also impressed the blade was square right out of the shipping box. The power switch did break, but it was easily replaced for $30.
Pros
- Easy To Use
- Good Design
- Powerful
- Safe
Cons
Best Uses
- Home Improvement
- In The Workshop
Comments about Ridgid 10-in Portable Table Saw with Stand:
This saw is great. Out of the box I took the time to tune it up and it has stayed in tune. I use in a small garage shop so the bumps are minimal but occur. It is nice to have a portable saw I don't have to tune-up every time you set it up.
Pros
- Easy To Use
- Good Design
- Good power output
- Good Value
- Great Blade
- Powerful
Cons
Best Uses
- In The Workshop
Comments about Ridgid 10-in Portable Table Saw with Stand:
This is one great saw! I've used it for ripping, cross cutting, mitering, etc. and it works great! Has ample power, easy to use, precise, table extends, and is accurate.
Displaying reviews 1-10
Previous | Next »
